BGC Roof Fitout - 28 The Esplanade

BCJ Plastic Products were approached by BGC Building and Construction to Blow 115 Shinkolite 6mm Acrylic Grey domes to be blown out of 2.4 x 2.4 mt sheets all to the same height which is no easy feat these were to replace the existing ones that were 35 years old

Overview

BCJ Plastic Products were approached by BGC Building and Construction to Blow 115 Shinkolite 6mm Acrylic Grey domes to be blown out of 2.4 x 2.4 mt sheets all to the same height which is no easy feat these were to replace the existing ones that were 35 years old

This material had to made in Japan and shipped over in a container the reason for using Shinkolite L it has significantly better thermoforming than conventional glass cell cast sheet and can be formed to greater detail at shorter cycle time. The light transmission for this material is about 15% and heat cut ratio close to 58% so very well suited for this particular job as you will see by the photos of the installed job.

Laboratory test shows the temperature is decreased around 10 degree’s Celsius at 45 degree’s Celsius with this particular material. It has excellent weatherabilty with little discoloration and decrease in strength from sunlight ,wind and weather

 

Brief Sheet / Specs

Requirements:

2.4m Roof Domes

Manufacturing:

Blow Mould

Materials:

Shinkolite 6mm Acrylic

Why choose BCJ Plastic Products

With over 40 years experience in the plastic products manufacturing game, BCJ's helpful team has not only the skills but have gained the knowledge, through experience, from a wide range of industries including mining and automotive across domestic and commercial sectors.

Find out more about our services and team